Adjustable Tilting/Swiveling Wall Mount Bracket for LCD Plasma (Max 110Lbs, 32~50inch) - Black

This TV wall mount bracket is strong and robust and allows maximum flexibility for installing and viewing your television. It is ideal for corners because you can twist, tilt and swivel your TV to nearly any position you want. Also features an adjustment for lateral positioning. Backplate measures 45cm wide giving numerous fixing points, ideal for stud walls.

The difference between this model and the other model is that the extension arm reaches out up to 16" on this model. The other model has an extension arm reaching up to 25".


Warning: This mounting bracket is not compatible with certain LG (r), PIONEER(r) and Sharp(r) brand TVs. Specifically, the following models are not compatible. Pioneer: PDP-6100HD, PRO-1410HD, PDP-614MX, PDP-6070HD, PRO-1540HD, PDP-607CMX, PRO151FD. Sharp: LC-65D93U, LC-65D90U, LC-57D90U, LC-65D64U, LG: LG52LG50-UA, (use LCD/Plasma Wall Mount Bracket 37 to 65 inch - Wide) LG52LG50 (use LCD/Plasma Wall Mount Bracket 37 to 65 inch - Wide), Phillips 42PF9630A137 (use LCD/Plasma Wall Mount Bracket 37 to 65 inch - Wide)

*Supported screen sizes in descriptions are provided as a guide. Not all models of televisions will fall within guidelines.
**PLEASE CHECK SPECIFICATIONS BELOW FOR ADDITIONAL COMPATIBILITY INFORMATION!

Specifications
Model #: PLB-WA8S Black
Type: Articulating
Minimum VESA: 400X200
Maximum VESA: 700 x 500
Maximum Weight : 110 lbs
Minimum Req. Display Size: 32"
Maximum Req. Display Size: 50"
Minimum Extension: 5"
Maximum Extension: 16"
Tilt Range: 15 degrees
Swivel Range: 180 degrees
Construction: Steel
Color: Black
Wall Plate Dimensions: 17.72" x 7.09"
Front Plate Dimensions: 12" x 6.09"
Built In Level NO
Cable Management NO
Notes: Corner friendly

Compatibility

Minimum VESA: 400X200mm
Maximum VESA: 700 x 500mm

Please refer to the user manual on your TV to find the VESA Mounting pattern.
*Mounting holes on TV should be 27.5" or less apart horizontally & 19." or less apart vertically.
Maximum weight capacity: 110lbs./75kg

Features:



• Extends up to 405mm (16") from the wall


• Folds back to only 130mm (5") from the wall


• Swivels left and right at wall, elbow and faceplate


• Tilts up to 5 degrees up and 15 degrees down


• Max loading capacity: 50kg/110 pounds

Includes:


• Wall Bracket


• Screws to go into the back of the TV


• Fittings for brick and stud walls


• Instruction Manual


FAQ
Question: Can I mount this bracket to metal wall studs?
Answer: Our mounts come with hardware to mount to wooden studs or concrete. There are no instructions or hardware provided for mounting to metal studs. While the mount should work with metal studs, it is recommended that you consult with a professional installer or seek the advice of someone in your local hardware store to find out how to do it properly and securely.The maximum weight capacity the wall will hold may be less than mounting to wooden studs or concrete.

Question: Why do the mounting lag bolts keep snapping inside of my wall?
Answer: This can happen with any lag bolts being installed. Everything Depends on if there is a knot in the wooden stud and how much torque you're applying. You need to pre drill into the stud as deep as you will be screwing down the lag bolt. A simple lag bolt being tighten too fast or too strong can split the wooden stud and cause the bolt to easily break. It is recommended to pre-drill a hole the size of the bolt being installed, slowly torque the bolt in. Do not overtighten the bolt. Since over tightening the bolt may cause it to break.